VMware Monitor (Read-Only)

Disclaimer: This is a community-maintained open-source project and is not affiliated with, endorsed by, or sponsored by VMware, Inc. or Broadcom Inc. "VMware" and "vSphere" are trademarks of Broadcom. Source code is publicly auditable at github.com/zw008/VMware-Monitor under the MIT license.

Read-only VMware vCenter/ESXi monitoring — 8 MCP tools, zero destructive code.

Code-level safety: This skill contains NO power, create, delete, snapshot, or modify operations. Not disabled — they don't exist in the codebase. Companion skills: vmware-aiops (VM lifecycle), vmware-storage (iSCSI/vSAN), vmware-vks (Tanzu Kubernetes), vmware-nsx (NSX networking), vmware-nsx-security (DFW/firewall), vmware-aria (metrics/alerts/capacity), vmware-avi (AVI/ALB/AKO). | vmware-pilot (workflow orchestration) | vmware-policy (audit/policy)

What This Skill Does

Quick Install

uv tool install vmware-monitor
vmware-monitor doctor

When to Use This Skill

• List or search VMs, hosts, datastores, clusters
• Check active alarms or recent events
• Get detailed info about a specific VM
• Set up scheduled monitoring with webhook alerts
• Any read-only VMware query where safety is paramount

Alarm/Event Output: suggested_actions Field

get_alarms and get_events results include a suggested_actions list. Each item is a ready-to-use hint pointing to the correct companion skill and tool:

{
  "alarm_name": "VM CPU Ready High",
  "entity_name": "prod-db-01",
  "suggested_actions": [
    "vmware-aiops: acknowledge_vcenter_alarm(entity_name='prod-db-01', alarm_name='VM CPU Ready High')",
    "vmware-aiops: reset_vcenter_alarm(entity_name='prod-db-01', alarm_name='VM CPU Ready High')"
  ]
}

AI agents (especially smaller local models) can read these hints directly to determine which skill and tool to call next, without needing to reason about skill routing themselves.

Use companion skills for:

• Power on/off, deploy, clone, migrate --> vmware-aiops
• iSCSI, vSAN, datastore management --> vmware-storage
• Tanzu Kubernetes clusters --> vmware-vks
• Load balancing, AVI/ALB, AKO, Ingress --> vmware-avi

Related Skills — Skill Routing

Common Workflows

Diagnostic investigations: Before running any "why is X failing / down / abnormal" workflow, follow references/investigation-protocol.md. It enforces the four root-cause completeness criteria (falsifiability / sufficiency / necessity / mechanism) and the up-to-three-rounds deepening loop. Since vmware-monitor is read-only, it serves as the data source — actuation belongs to companion skills like vmware-aiops.

Daily Health Check

Judgment: alarms tell you what vCenter has decided is wrong, events tell you what happened. They diverge — an event burst with no alarms often signals a metric threshold miscalibration, not "everything is fine." Read both.

1. Check alarms --> vmware-monitor health alarms --target prod-vcenter — focus on Red severity AND alarms older than 1 hour (transient ones self-clear)
2. Review recent events --> vmware-monitor health events --hours 24 --severity warning — look for repeated events from the same entity (a single event is noise; 50 events in an hour is a pattern)
3. List hosts --> vmware-monitor inventory hosts — flag hosts disconnected, in maintenance mode unexpectedly, or memory > 90%
4. If connection fails --> run vmware-monitor doctor to diagnose config/network issues

Investigate a Specific VM

1. Find the VM --> vmware-monitor inventory vms --power-state poweredOff
2. Get details --> vmware-monitor vm info problem-vm
3. Check related events --> vmware-monitor health events --hours 48
4. If VM not found --> verify VM name with vmware-monitor inventory vms --limit 100 or check target with --target <other-vcenter>

Set Up Continuous Monitoring

1. Configure webhook in ~/.vmware-monitor/config.yaml
2. Start daemon --> vmware-monitor daemon start
3. Daemon scans every 15 min, sends alerts to Slack/Discord

Usage Mode

MCP Tools (8 — all read-only)

All tools are read-only. No tool can modify, create, or delete any resource.

CLI Quick Reference

vmware-monitor inventory vms [--target <t>] [--limit 20] [--power-state poweredOn]
vmware-monitor inventory hosts [--target <t>]
vmware-monitor inventory datastores [--target <t>]
vmware-monitor inventory clusters [--target <t>]
vmware-monitor health alarms [--target <t>]
vmware-monitor health events [--hours 24] [--severity warning]
vmware-monitor vm info <vm-name> [--target <t>]
vmware-monitor scan now [--target <t>]
vmware-monitor daemon start|stop|status
vmware-monitor doctor [--skip-auth]

Full CLI reference: see references/cli-reference.md

Troubleshooting

Alarms returns empty but vCenter shows alarms

The get_alarms tool queries triggered alarms at the root folder level. Some alarms are entity-specific — try checking events instead: get_events --hours 1 --severity info.

"Connection refused" error

1. Run vmware-monitor doctor to diagnose
2. Verify target hostname/IP and port (443) in config.yaml
3. For self-signed certs: set disableSslCertValidation: true

Events returns too many results

Use severity filter: --severity warning (default) filters out info-level events. Use --hours 4 to narrow time range.

VM info shows "guest_os: unknown"

VMware Tools not installed or not running in the guest. Install/start VMware Tools for guest OS detection, IP address, and guest family info.

Doctor passes but commands fail with timeout

vCenter may be under heavy load. Try targeting a specific ESXi host directly instead of vCenter, or increase connection timeout in config.yaml.

Setup

uv tool install vmware-monitor
mkdir -p ~/.vmware-monitor
vmware-monitor init
chmod 600 ~/.vmware-monitor/.env  # if using webhooks

All tools are automatically audited via vmware-policy. Audit logs: vmware-audit log --last 20

Full setup guide, security details, and AI platform compatibility: see references/setup-guide.md

Audit & Safety

All operations are automatically audited via vmware-policy (@vmware_tool decorator):

• Every tool call logged to ~/.vmware/audit.db (SQLite, framework-agnostic)
• Policy rules enforced via ~/.vmware/rules.yaml (deny rules, maintenance windows, risk levels)
• Risk classification: each tool tagged as low/medium/high/critical
• View recent operations: vmware-audit log --last 20
• View denied operations: vmware-audit log --status denied

vmware-policy is automatically installed as a dependency — no manual setup needed.

License

MIT — github.com/zw008/VMware-Monitor