OpenClaw SLS Integration

This skill provisions Alibaba Cloud SLS observability for OpenClaw on Linux and keeps reruns safe.

At a high level, execute this flow:

1. Check and install aliyun CLI (install latest when missing)
2. Install LoongCollector by project region (skip if already running)
3. Create an identifier-based machine group (local identifier + cloud machine group)
4. Create logstore index and dashboards
5. Create logstore collection config
6. Bind the collection config to the machine group

Capture Intent Before Execution

Before running commands, make sure the user intent is complete:

1. Confirm the target PROJECT and LOGSTORE.
2. Confirm Linux host access with sudo available.
3. Confirm AK/SK are already exported in environment variables.
4. If any required input is missing, ask for it first and do not run partial setup.

Prerequisites

Required:

• PROJECT: SLS project name
• LOGSTORE: SLS logstore name

Read from environment variables:

• ALIBABA_CLOUD_ACCESS_KEY_ID
• ALIBABA_CLOUD_ACCESS_KEY_SECRET
• ALIYUN_UID (used for the local UID file under /etc/ilogtail/users)

Recommended optional:

• ALIBABA_CLOUD_REGION_ID (auto-resolved from PROJECT when not set)

If you use different AK/SK variable names, export them to these standard names first.

Expected Result

After successful execution, the environment should contain:

• Running LoongCollector (or ilogtaild) on the host
• Machine group openclaw-sls-collector
• Logstore index created on the target LOGSTORE
• Dashboards openclaw-audit and openclaw-gateway
• Collection config openclaw-audit_${LOGSTORE}
• Config binding between openclaw-audit_${LOGSTORE} and openclaw-sls-collector

One-Time Execution Flow (Idempotent)

The commands below are designed as "exists -> skip" and are safe to rerun. Strict template mode: for index/config/dashboard payloads, always read from files in references/. Do not handcraft or simplify JSON bodies beyond required placeholder replacement.

set -euo pipefail

# ===== User inputs =====
: "${PROJECT:?Please export PROJECT}"
: "${LOGSTORE:?Please export LOGSTORE}"
: "${ALIBABA_CLOUD_ACCESS_KEY_ID:?Please export ALIBABA_CLOUD_ACCESS_KEY_ID}"
: "${ALIBABA_CLOUD_ACCESS_KEY_SECRET:?Please export ALIBABA_CLOUD_ACCESS_KEY_SECRET}"
: "${ALIYUN_UID:?Please export ALIYUN_UID}"

MACHINE_GROUP="openclaw-sls-collector"
CONFIG_NAME="openclaw-audit_${LOGSTORE}"

# 1) Install aliyun CLI if missing (Linux)
if ! command -v aliyun >/dev/null 2>&1; then
  if command -v apt-get >/dev/null 2>&1; then
    sudo apt-get update
    sudo apt-get install -y aliyun-cli
  elif command -v dnf >/dev/null 2>&1; then
    sudo dnf install -y aliyun-cli
  elif command -v yum >/dev/null 2>&1; then
    sudo yum install -y aliyun-cli
  elif command -v zypper >/dev/null 2>&1; then
    sudo zypper -n install aliyun-cli
  else
    echo "aliyun CLI not found. Install aliyun-cli manually for your Linux distribution." >&2
    exit 1
  fi
fi

# Export auth variables for aliyun CLI
export ALIBABA_CLOUD_ACCESS_KEY_ID
export ALIBABA_CLOUD_ACCESS_KEY_SECRET

is_loong_running() {
  if sudo /etc/init.d/loongcollectord status 2>/dev/null | grep -qi "running"; then
    return 0
  fi
  if sudo /etc/init.d/ilogtaild status 2>/dev/null | grep -qi "running"; then
    return 0
  fi
  return 1
}

# 2) Resolve region and install LoongCollector (skip when already running)
REGION_ID="${ALIBABA_CLOUD_REGION_ID:-}"
if [ -z "$REGION_ID" ]; then
  REGION_ID="$(aliyun sls GetProject --project "$PROJECT" --cli-query 'region' --quiet 2>/dev/null | tr -d '\"' || true)"
fi
if [ -z "$REGION_ID" ]; then
  echo "Cannot resolve region from project: $PROJECT. Please set ALIBABA_CLOUD_REGION_ID." >&2
  exit 1
fi

if ! is_loong_running; then
  wget "https://aliyun-observability-release-${REGION_ID}.oss-${REGION_ID}.aliyuncs.com/loongcollector/linux64/latest/loongcollector.sh" -O loongcollector.sh
  chmod +x loongcollector.sh
  ./loongcollector.sh install "${REGION_ID}"
fi

# Post-install verification: one of loongcollectord/ilogtaild must be running.
if ! is_loong_running; then
  sudo /etc/init.d/loongcollectord start >/dev/null 2>&1 || true
  sudo /etc/init.d/ilogtaild start >/dev/null 2>&1 || true
fi
if ! is_loong_running; then
  echo "LoongCollector installation check failed: neither loongcollectord nor ilogtaild is running." >&2
  exit 1
fi

# 3) Local user-defined identifier + create machine group
sudo mkdir -p /etc/ilogtail
sudo mkdir -p /etc/ilogtail/users
if [ ! -f /etc/ilogtail/user_defined_id ]; then
  sudo touch /etc/ilogtail/user_defined_id
fi
RAND8="$(LC_ALL=C tr -dc 'a-z0-9' </dev/urandom | head -c 8)"
USER_DEFINED_ID_PREFIX="${PROJECT}_openclaw_sls_collector_"
EXISTING_USER_DEFINED_ID="$(sudo awk -v p="${USER_DEFINED_ID_PREFIX}" 'index($0,p)==1 {print; exit}' /etc/ilogtail/user_defined_id 2>/dev/null || true)"
if [ -n "${EXISTING_USER_DEFINED_ID}" ]; then
  USER_DEFINED_ID="${EXISTING_USER_DEFINED_ID}"
else
  USER_DEFINED_ID="${USER_DEFINED_ID_PREFIX}${RAND8}"
  echo "${USER_DEFINED_ID}" | sudo tee -a /etc/ilogtail/user_defined_id >/dev/null
fi
if ! sudo grep -Fxq "${USER_DEFINED_ID}" /etc/ilogtail/user_defined_id 2>/dev/null; then
  echo "Failed to persist USER_DEFINED_ID to /etc/ilogtail/user_defined_id" >&2
  exit 1
fi
if [ ! -f "/etc/ilogtail/users/${ALIYUN_UID}" ]; then
  sudo touch "/etc/ilogtail/users/${ALIYUN_UID}"
fi
if [ ! -f "/etc/ilogtail/users/${ALIYUN_UID}" ]; then
  echo "Failed to create UID marker file: /etc/ilogtail/users/${ALIYUN_UID}" >&2
  exit 1
fi

if ! aliyun sls GetMachineGroup --project "$PROJECT" --machineGroup "$MACHINE_GROUP" >/dev/null 2>&1; then
  cat > /tmp/openclaw-machine-group.json <<EOF
{
  "groupName": "${MACHINE_GROUP}",
  "groupType": "",
  "machineIdentifyType": "userdefined",
  "machineList": ["${USER_DEFINED_ID}"]
}
EOF
  aliyun sls CreateMachineGroup \
    --project "$PROJECT" \
    --body "$(cat /tmp/openclaw-machine-group.json)"
fi
if ! aliyun sls GetMachineGroup --project "$PROJECT" --machineGroup "$MACHINE_GROUP" >/dev/null 2>&1; then
  echo "Machine group was not created successfully: ${MACHINE_GROUP}" >&2
  exit 1
fi

# 4) Create logstore (if missing) + index + multiple dashboards
if ! aliyun sls GetLogStore --project "$PROJECT" --logstore "$LOGSTORE" >/dev/null 2>&1; then
  aliyun sls CreateLogStore --project "$PROJECT" \
    --body "{\"logstoreName\":\"${LOGSTORE}\",\"ttl\":30,\"shardCount\":2}"
fi

if ! aliyun sls GetIndex --project "$PROJECT" --logstore "$LOGSTORE" >/dev/null 2>&1; then
  # Use the index template as-is from references/index.json
  aliyun sls CreateIndex \
    --project "$PROJECT" \
    --logstore "$LOGSTORE" \
    --body "$(cat references/index.json)"
fi

sed "s/\${logstoreName}/${LOGSTORE}/g" references/dashboard-audit.json > /tmp/openclaw-audit-dashboard.json
sed "s/\${logstoreName}/${LOGSTORE}/g" references/dashboard-gateway.json > /tmp/openclaw-gateway-dashboard.json

# Create dashboard uses project + body(detail). Update uses path + project + body.
if aliyun sls GET "/dashboards/openclaw-audit" --project "$PROJECT" >/dev/null 2>&1; then
  aliyun sls PUT "/dashboards/openclaw-audit" \
    --project "$PROJECT" \
    --body "$(cat /tmp/openclaw-audit-dashboard.json)"
else
  aliyun sls POST "/dashboards" \
    --project "$PROJECT" \
    --body "$(cat /tmp/openclaw-audit-dashboard.json)"
fi

if aliyun sls GET "/dashboards/openclaw-gateway" --project "$PROJECT" >/dev/null 2>&1; then
  aliyun sls PUT "/dashboards/openclaw-gateway" \
    --project "$PROJECT" \
    --body "$(cat /tmp/openclaw-gateway-dashboard.json)"
else
  aliyun sls POST "/dashboards" \
    --project "$PROJECT" \
    --body "$(cat /tmp/openclaw-gateway-dashboard.json)"
fi

# 5) Create collection config (update when already exists)
# Render collector config strictly from references/collector-config.json
sed \
  -e "s/\${configName}/${CONFIG_NAME}/g" \
  -e "s/\${logstoreName}/${LOGSTORE}/g" \
  -e "s/\${region_id}/${REGION_ID}/g" \
  references/collector-config.json > /tmp/openclaw-collector-config.json

if aliyun sls GetConfig --project "$PROJECT" --configName "$CONFIG_NAME" >/dev/null 2>&1; then
  aliyun sls UpdateConfig \
    --project "$PROJECT" \
    --configName "$CONFIG_NAME" \
    --body "$(cat /tmp/openclaw-collector-config.json)"
else
  aliyun sls CreateConfig \
    --project "$PROJECT" \
    --body "$(cat /tmp/openclaw-collector-config.json)"
fi

# 6) Bind collection config to machine group
aliyun sls ApplyConfigToMachineGroup \
  --project "$PROJECT" \
  --machineGroup "$MACHINE_GROUP" \
  --configName "$CONFIG_NAME"

echo "OpenClaw SLS observability setup completed."

Response Format

When this skill completes, return a concise status report with:

1. Inputs used: PROJECT, LOGSTORE, resolved REGION_ID
2. Created/updated resources (machine group, index, dashboards, config, binding)
3. Any skipped steps (already existed / already running)
4. Next verification commands for the user

Verification Commands

aliyun sls GetMachineGroup --project "$PROJECT" --machineGroup openclaw-sls-collector
aliyun sls GetIndex --project "$PROJECT" --logstore "$LOGSTORE"
aliyun sls GetDashboard --project "$PROJECT" --dashboardName openclaw-audit
aliyun sls GetDashboard --project "$PROJECT" --dashboardName openclaw-gateway
aliyun sls GetConfig --project "$PROJECT" --configName "openclaw-audit_${LOGSTORE}"

Reference Files

• Command flow: references/cli-commands.md
• Index definition: references/index.json
• Dashboard templates: references/dashboard-audit.json, references/dashboard-gateway.json
• Collection config template: references/collector-config.json

Read reference files only when needed:

• Use cli-commands.md for step-by-step troubleshooting.
• Use JSON templates when creating/updating resources.